Hardware settings

Hardware settings

POS FOH


Hardware Settings

  1. Type in your PIN then tap operations
  2. Tap on hardware settings
  3. Choose from Card Reader, Printer Settings, Customer Display, and Scale
  4. Tap on the device you wish to use for the Ipad under the IP section or Bluetooth section
  5. There will be a check mark next to the device








    • Related Articles

    • Recommended Hardware - PDF

      Please download out list below.

    • Store Settings Enhancement

      Introduction: This document explains regarding the changes done in the settings menu of the back office. Implementation in Back Office: Page Navigation: My Stores >> Settings >> Store The settings menu includes the following tabs, 1)      Store ...

    • Store Settings

      Settings > Store Store Information- Here is all the info for your store. You must add address and then click the Get my location button to fill in the Latitude\Longitude. Settings- -          Log off after each sale- Once sale is tendered it will ...

    • Linga Settings

      To edit Linga settings, navigate to: Settings -> Store -> Settings (Top Menu)   Log Off After Each Sale -          Once payment is accepted on the check it will log that user off and require reentry of passcode to place next order. This setting is ...

    • Star Printer DIP Settings

      Supported Printers and Settings o SP500 and SP700: Set DIP switch 4 OFF o TSP650, TSP650II, TSP70II, and FVP10: Set DIP switch 1-1 (On the group of 8) OFF o TSP800II: Set DIP switches 1-1 and 1-2 (On the group of 8) OFF • The DIP switches are located ...