IOT Wi-Fi Configuration

IOT Wi-Fi Configuration

Introduction

 

Using the IOT Free Wi-Fi we can get the customer’s information while they access the internet from stores. These customer details can be used in the future reference. With the help of Mesh Integra on, we can provide free Wi-Fi access.

 

This document describes the configuration of Mesh in our Linga application.

 

Configuration in the Back Office

 

Wi-Fi

Enable the op on “Free Wi-Fi” in a store in the Hot Spot screen. [IOT >> Hot Spot >> Wi-Fi]

Select any op on from the “Template for User Details”.

 

Copy the link displayed in the “Free Wi-Fi Page URL”. Note: This link will be used to configure in the CloudTrax.

 

Finally, click on the “Save” button


Configuration in the Mesh Device (OM2P -V2)

Device should be switched on and LAN connecQon should be provided which had the internet connecQvity also.

 

To configure the URL, we need to login with CloudTrax

 

Configuration in the CloudTrax

 

Enter the following URL in the browser: https://ct4.cloudtrax.com/login

Provide the credentials and click on the Login button.


Navigate to SSID 2 screen. [Configure >> SSID based on which number your device is connected.]


Enable the Splash page

Select Hosted remotely and provide Splash page URL: Paste the Free Wi-Fi Page URL Link here

Select HTTP in the Splash page authentication type

Provide the same Free Wi-Fi Page URL in the URL field

Provide the secret password as you required

Finally, click on the Save Changes button available at the top of the screen



To Customer

 

Once the settings are provided, when the customer tries to connect to Mesh Wi-Fi, they will be redirected to the Free Wi-Fi Page URL in the browser

 

The customer will provide all the details and click on the Connect button

 

On clicking the “Connect” button, the customer will be navigated to the Google page. All the details will be saved in the Customer details of the store

 






    • Related Articles

    • Network Requirements

      •        Linga requires a wired network for all our installations especially for table service locations. •        Each Linga POS device needs to have a Cat6 drop dedicated to it. •        Do not splice or use the Cat6 lines for phone or other ...

    • Back Office: Enterprise - Menu Configuration

      Sign into the LingaPOS Back Office at mystore.lingapos.com. On the left-side Navigation Panel, click Enterprise. Then click Menu Configuration. Menu Configuration allows you to transfer data from one Store to other Stores to eliminate duplicate ...

    • Sort Menu Config

      Select “Products/Items” then “Sort Menu Config”   Sort Menu Config for Categories: Select the gear icon on the top right corner of the box    You will be able to either “Custom Sort” the categories or select “Sort A-Z” or “Sort Z-A” and select “Save” ...

    • Back Office: KDS Configuration Template Settings

      Sign into the LingaPOS Back Office and select a Store. On the left-side Navigation Panel, click Settings. On the Settings page, under Printer Templates click KDS Configuration. On the KDS Configuration screen: the Field options, Style options, and ...

    • Build Version 2.1.17 - Release Notes

      RELEASE NOTES Enhancements Dual Cash Drawer Linga POS support dual cash drawers for one printer. This will allow the ability to assign each till for specific employees. Reference: Dual Cash Drawer Tax per Service Type We are going to introduce a new ...