Network Setup using Bluetooth Receipt Printer

• Related Articles

• GiveX setup manual.

  Please find the steps to setup the GiveX in super admin page   1.Go to Super admin page 2.Enable the GiveX option 3.Enter the User Id 4.Enter password and Confirm password 5.Enter Primary URL and Secondary URL 6.Click save button   Please find the ...

• Epson TM-M30 IP Connection

  Note:  This information is available in a Word document and PDF file at the bottom of the page.   Plug in network Cable press the paper feed button the turn the power on You will see the ! display on the screen release the feed button.  Press the ...

• Adding a Receipt Printer

  Adding a Receipt Printer to the Back Office: Select “Settings”, “Printer Configuration”, “Receipt Printers” Select “+Receipt Printer” Type in the IP address from the ticket and press “Update”

• EPSON TM-M30 Wireless Printer

  Note:  This information is available in a Word document and PDF file at the bottom of the page.  How to Reset a Tm-m30 Wireless Printer to setup on a system: First turn off power to the printer Step 1: Insert a paper clip into the status sheet button ...

• S700 Bluetooth Scanner Setup

  Connecting a BT Scanner: Turn on the Scanner by holding down the small black button until you see the green and blue lights After device is on scan this barcode. This will reset the scanner back to factory default The device will now turn off and you ...