Star Printer DIP Settings

Star Printer DIP Settings

Supported Printers and Settings

o SP500 and SP700: Set DIP switch 4 OFF

o TSP650, TSP650II, TSP70II, and FVP10: Set DIP switch 1-1 (On the group of 8) OFF

o TSP800II: Set DIP switches 1-1 and 1-2 (On the group of 8) OFF • The DIP switches are located on the bottom of the printer. Make sure the printer is OFF before making any changes. 
• Remove the screw from the DIP switch cover and remove. Then, set the DIP switch using a ballpoint pen or similar tool.

Note: We do not support or install Star Printers. 
    • Related Articles

    • Linga Printer Compatibility

      • We offer full support for printers available on our shopping website. They have all been tested with Linga POS. • There are some other printers from Epson and Bixalon that may work with Linga, but we do not guarantee they will work.  o Testing: If ...
    • Recommended Hardware - PDF

      Please download out list below.
    • Star TSP100III

      Note:  This information is available in a Word document and PDF file at the bottom of the page.  Perform a Self-Test: Hold down the feed button and turn the printer on (wait 3 seconds) and release the feed button and a self-test will print Self-Test: ...
    • Printer Settings and Configuration

      Settings > Printer Configuration   Front End Receipt- Configure what you would like to include on the customer check. If you would like to add your logo be sure to use black and white and no bigger than 300x300. Kitchen Receipt Template- Chose what ...
    • Store Settings Enhancement

      Introduction: This document explains regarding the changes done in the settings menu of the back office. Implementation in Back Office: Page Navigation: My Stores >> Settings >> Store The settings menu includes the following tabs, 1)      Store ...