eDynamo Pairing

Hold the power button down for 3 seconds until the blue light flashes

Go to “Operation”

Enter 000000 and select pair

Select “Hardware Settings”

Select the eDynamo that you are connecting and after selecting a “Check Mark” will appear

• Related Articles

• Verifying Credit Card Tips Per Employee

  *NOTE* YOU MUST SUBMIT BATCH BEFORE VIEWING REPORT FOR SAME DAY   Navigate to Settings, and then Reports   Then click batch:   Select the nodes to show on Report (Node ID is located on the top left of the iPad login screen): Then, select the ...

• Enhancement in Gift Card

  Implementation in Back Office:   Page Navigation: My Stores >> Products/Items >> Gift Card   Users can do issue (sold), recharge, Adjust for the gift card at the back office.   And the values are recorded in the gift card report as well as in the ...

• Enterprise Level Gift Card Report

  Implementation in Back Office: Page Navigation: My Enterprise >> Enterprise Report >> Gift Card >> Redemption Report   The following fields should be included to filter the options and run the report, 1)      Stores – Users can select the stores they ...

• PAX s300 IP Address Help

  How to find the IP Address:  Log into the PAX Terminal (Hold Function + 1 to open the menu, enter the PW)  Navigate to communication Click LAN Parameters Click IP Address Set the IP Address by typing it into the system (Example Below)   How to set ...

• S700 Bluetooth Scanner Setup

  Connecting a BT Scanner: Turn on the Scanner by holding down the small black button until you see the green and blue lights After device is on scan this barcode. This will reset the scanner back to factory default The device will now turn off and you ...