Allure Installation Instructions

Allure Installation Instructions


A powerpoint version of this document is available at the bottom of the page. 

















TDynamo Device Steps

Back Office instructions

  1. add the payment device into the back office.
  1.  First, go to Settings, Store, and Payments.
  1.  Click "Add Payment Method", enter the Payment Type, Payment Name, and click "Add".
  1.  Make sure to sync your back office with the POS, the payment option will populate under "Payment" when closing out the check.
  1.  Go to settings, then click store, then select the payments tab
  1.  next, Add a new payment by selecting " plus payment method"
  1.  Select the payment type credit Card, and name the payment “tdynamo”
  1.  After you fill out these criteria,
  1.  Select Update, and finally, publish your changes.


Front of House Instructions
  1.  From the Allure home screen, go to settings, then connect bluetooth devices, and then select pair new device.
  1.  You will then see the Tdyanmo – S/N populate, under the bluetooth available devices list, this may take a few moments to generate.
  1.  After clicking on the device,  enter the code 000000, and then click "Ok".
  1.  now that your device is paired, Return to the homescreen  then select the linga app.
  1.  Select operations, then hardware settings, here you will see the Tdynamo payment option.
  1.  From here, select the T dynamo name underneath "Select a Bluetooth card reader."
  1. Once selected, you will see a check mark appear on the right-hand side.






    • Related Articles

    • Epson TM-M30 IP Connection

      Note:  This information is available in a Word document and PDF file at the bottom of the page.   Plug in network Cable press the paper feed button the turn the power on You will see the ! display on the screen release the feed button.  Press the ...
    • S700 & S740 Scanner Instructions

      Print this document on a good quality printer.  Go into Bluetooth first and press the i with a blue circle and forget the socket s700 scanner before you proceed. 1.Then turn on scanner and scan Step 1: this will make a sound and turn the scanner off ...
    • Zebra ZD420 Set up Instructions

      Power up of Printer YouTube video link https://www.youtube.com/watch?v=3cMPWRCqQJE Press the power button on the yellow light will illuminate, wait until you see the yellow light turn to green and the network symbol to illuminate. After you are on ...
    • Adding a Kitchen Printer: Video Instructions

      Adding a Kitchen Printer in the Back Office: Select “Settings”, “Printer Configuration” Go to “Kitchen Printers” or “Receipt Printers” whatever is applicable then select “+Kitchen Printer” (if adding a new printer) Edit the information and select ...
    • Linga POS Network Setup Guide

      Download PDF file below, under Attachments section. Ports to have open: HTTP port 80, https443, Port 9096 for sync