EPSON TM-M30 Wireless Printer

EPSON TM-M30 Wireless Printer

Note:  This information is available in a Word document and PDF file at the bottom of the page. 

How to Reset a Tm-m30 Wireless Printer to setup on a system:

First turn off power to the printer

Step 1: Insert a paper clip into the status sheet button

Step 2: (while holding the status Sheet button in with paper clip) Turn “on” the printer

Step 3: When the printer prints “Initialization complete” Release the status Sheet button

As shown: This will print when the printer is reset to default values

 NOTE: The IP is back to a default IP of

NOTE: Make sure your iPad is connected to the network your printer will be on

Go to the App Store and Download the Epson Tm Utility

After download open up the app on your Ipad

Select “Wi-Fi Setup Wizard”

Select “TM-m30” and select “Next”

The Screen will now change to this and follow the insturctions on this page then select “Printed”

The screen will change to this and press “Next”

Press “Allow”

Select “Back to return” to TM Utility

Now connect to the EPSON_Printer

Then press next

Step 1: Enter the Name of the wireless router this printer will connect to

Step 2: Press “Next”

Security Selection:

Step 1: Press None then choose the WPA2-PSK (TKIP/AES) (Encryption Key from ticket)

Step 2: Press next

 Step 1: Enter the passphrase to log into your router

(you can slide display the passphrase to verify the passphrase)

Step 2: Press “Next” when you know it is correct

Step 1: Turn off “DHCP”

Step 2: Enter the desired Ip Address for the printer

(It will automatically fill in the gateway)

Step 3: Select “Next”

Press “Set to printer” it will reconnect to the original WIFI

Go to the next screen

Select “Test Printing”

Select “Finish”

Setting up printer in BOH:

Select “Settings”, “Printer Configuration”, “Receipt Printers”

Select “+Receipt Printer”

Type in the IP address from the ticket and press “Update”

Setting up Printer in FOH:

Step 1: Log in to operations

Step 2: Go into hardware settings

Step 3: Press Printer setting

Step 4: touch the receipt printer you set up assign it to the terminal and it will now show a red check mark next to it.

    • Related Articles

    • EPSON TM-U220B

      Note:  This information is available in a Word document and PDF file at the bottom of the page.  To locate the IP Address for printer: On the back of the printer you will need to hold down the reset button (using a paper clip) until the “Dynamic ...
    • EPSON TM-M30 - USB Printer

      Installing Interface Plugin: Download:   AFTER DOWNLOAD MINIMIZE THE APPLICATION IF CLOSED OUT, PRINTER WILL NOT OPERATE Installing Zadig: Download: Go to ...
    • Epson TM-M30 IP Connection

      Note:  This information is available in a Word document and PDF file at the bottom of the page.   Plug in network Cable press the paper feed button the turn the power on You will see the ! display on the screen release the feed button.  Press the ...
    • EPSON TM - L 90 Label Printer

      EPSON TM – L 90 Label Printer In Settings>Store>Printers> Label Printers>  Press + Label Printers Next choose whether it is a  Menu item label only or an Address label (If you choose Menu you will use Kitchen Label Template to configure how the label ...
    • Kitchen Print Name in KOT

      Implementation in Back Office:   Page Navigation: My Stores >> Settings >> Store >> Printers >> Kitchen Receipt Template         A toggle option “Kitchen Printer Name” should be included in the Kitchen receipt template.         By default, the option ...